The Ultimate Vape Troubleshooting Guide: How to Fix Common Vape Kit Problems
Vaping is an enjoyable and satisfying experience for many, but, just like any tech device, vape kits may sometimes encounter problems. These issues can range from leaking to weak vapour production or even no vapour at all. Fortunately, most problems can be fixed with a little know-how and the right approach.
In this comprehensive guide, we will walk you through some of the most common vape kit problems and provide you with step-by-step solutions. Whether you're a beginner or a seasoned vaper, these troubleshooting tips will ensure you keep your vape kit working in top condition.
1. My Vape is Leaking – What’s Going On?
Leaking is one of the most frustrating issues a vaper can experience. It's typically caused by a few key factors such as improper assembly, overfilling, or faulty coils. Leaking not only wastes your e-liquid but can also damage your device and cause a mess.
Why it happens:
-
Over-tightening components – Excessive tightening of the coil, tank, or pod can cause the seals to fail, leading to leaks.
-
Incorrect filling technique – Filling your tank too much or spilling liquid when refilling can lead to leakage.
-
Worn-out seals – The rubber seals in your coil or tank can degrade over time and cause leaks.
-
E-liquid viscosity – Thicker e-liquids (higher VG) may not flow well in certain kits, leading to leakage.
How to fix it:
-
Check seals and o-rings: Inspect the seals on the coil and tank, and replace them if worn or damaged. Make sure they are properly aligned to avoid leaks.
-
Don’t overfill your tank: Leave a small amount of space at the top when filling your tank or pod to prevent spillage and leakage.
-
Tighten carefully: Don’t over-tighten the parts. Tighten just enough to create a good seal without forcing them.
-
Use the right e-liquid: For best results, use the recommended e-liquid for your device. Stick to the suggested VG/PG ratio to avoid leaks.
2. My Vape Kit Won’t Turn On – What’s the Problem?
This issue can occur for several reasons, from battery issues to problems with charging. If you press the fire button and nothing happens, it can be frustrating.
Why it happens:
-
Dead battery: The most obvious cause is that your battery is drained.
-
Poor connections: If the battery is not properly seated or there’s a faulty connection, the device won’t turn on.
-
Faulty charging cable or port: If your charging cable or port is damaged, your kit won’t charge properly, leading to it not turning on.
-
Locked device: Some devices have a safety feature that locks the power button to prevent accidental firing.
How to fix it:
-
Charge the battery: Ensure the battery is fully charged. Try a different charger if necessary.
-
Check the battery orientation: Make sure the battery is inserted correctly and making good contact.
-
Turn off lock mode: If your vape device is locked, unlock it by clicking the fire button the required number of times (usually 5-7 clicks).
-
Try a different charging cable or port: Test another cable or port to rule out charging issues.
3. Why Is My Vape Producing a Weak Hit or No Vapour?
Weak vapour production is a common issue, particularly if you’ve been using the device for a while. The reason for weak hits can range from low e-liquid levels to issues with your coil or settings.
Why it happens:
-
Burnt coil: A dry or burnt coil is one of the most common causes of weak vapour production.
-
Low e-liquid level: If your pod or tank is running low, the wick may not be fully saturated with e-liquid, reducing vapour output.
-
Wattage too low: If the wattage is too low for the coil you're using, it can result in weak vapour production.
-
Airflow issues: Restricted airflow can reduce the amount of vapour being produced.
How to fix it:
-
Replace the coil: Check the coil and replace it if it's burnt out or clogged.
-
Top up your e-liquid: Ensure that there’s enough e-liquid in your tank or pod. Low liquid levels can cause weak hits.
-
Adjust the wattage: If your device allows for wattage control, increase the wattage slightly to find the sweet spot for vapour production.
-
Check airflow settings: Adjust the airflow settings to ensure smooth airflow and maximum vapour output.
4. I’m Getting a Burnt Taste – What Should I Do?
A burnt taste while vaping is typically a sign that your coil has burned out or that your coil is dry due to insufficient e-liquid saturation.
Why it happens:
-
Dry coil: If your coil isn’t saturated with e-liquid, it can burn, leading to a foul, burnt taste.
-
Old or damaged coil: As coils age, they can develop hot spots, which can also lead to a burnt taste.
-
Too high wattage: Using high wattage with a coil that isn’t rated for it can cause burning.
How to fix it:
-
Prime your coil: Always prime your new coil by adding a few drops of e-liquid directly to the cotton before using it. Let the coil sit for 5-10 minutes to soak the e-liquid.
-
Lower your wattage: Reduce the wattage to avoid burning the coil if you’re using a new coil.
-
Replace the coil: If the burnt taste persists, it may be time to replace the coil completely.
5. My Vape Kit Is Making Strange Noises – What Could It Be?
If your vape kit is producing strange noises like gurgling, whistling, or bubbling sounds, it may indicate issues with airflow or the coil.
Why it happens:
-
Excess e-liquid in the coil: Sometimes, if too much e-liquid is in the coil, it can cause bubbling or gurgling sounds.
-
Incorrect airflow settings: Tight airflow settings can result in whistling or sputtering noises.
-
Worn-out coil or cotton: A damaged coil or wick can make noise while firing, especially if the wick is not fully saturated.
How to fix it:
-
Clean the coil: Ensure the coil is clean and free from excess e-liquid. If the coil is too wet, wipe it dry and clean any excess liquid.
-
Check airflow settings: Adjust the airflow to ensure smooth and quiet operation.
-
Replace the coil: If the coil is too worn out, replacing it will eliminate the noise and improve your vaping experience.
6. Why Is My Vape Kit Battery Draining Quickly?
A battery that drains quickly can leave you without power when you need it most. There are several potential causes for rapid battery depletion.
Why it happens:
-
High wattage settings: Vaping at high wattage can quickly drain the battery, especially if you’re using a high-powered device.
-
Frequent use: If you're vaping frequently throughout the day, your battery will naturally deplete faster.
-
Battery age: Older batteries tend to lose their capacity to hold a charge over time.
-
Background functions: Some features like screens and constant adjustments can drain battery life faster.
How to fix it:
-
Lower your wattage: Reduce your wattage to extend the battery life. Higher wattages require more power to fire the coil.
-
Turn off unused features: If your device has additional features like a screen or advanced settings, turn them off when not in use to save battery.
-
Swap the battery: If your device uses removable batteries, try replacing the battery with a fresh one or consider buying new batteries if they’re old.
7. My Vape Kit Is Getting Hot – Is This Normal?
If your vape kit is getting unusually hot during use, it’s a sign that there might be something wrong with the coil or the settings.
Why it happens:
-
Overuse: Continuous vaping without allowing the device to cool down can cause it to overheat.
-
Incorrect wattage: Using a coil at a wattage that’s too high can cause the device to heat up.
-
Damaged coil or battery: A faulty coil or battery can cause excess heat and reduce the safety of the device.
How to fix it:
-
Take breaks: If your device is heating up, stop vaping for a while to let it cool down.
-
Reduce wattage: Lower the wattage if it’s too high for your coil to prevent overheating.
-
Replace damaged parts: If the coil or battery is damaged, replace them to prevent further heating.
Final Thoughts
Most vaping issues are fixable with a little know-how. By following these troubleshooting steps, you can keep your vape kit in great working order and enjoy a better vaping experience. Always remember to regularly maintain your device, replace worn-out coils, and keep it clean to avoid many of these common problems.
If you’re still facing issues or feel like it’s time to upgrade your vape kit, browse our collection of top-quality devices to find the perfect solution for your needs. Cloud Vapez UK has something for everyone!